Access/Start Authorization Antenna 2 in Vehicle Interior (R139)

Access/Start Authorization Antenna 2 in Vehicle Interior (R139)

The access/start authorization antenna 2 in vehicle interior is located behind the rear seat bench.

• No coding, basic setting or adaptation is necessary if access/start authorization antenna 2 in vehicle interior is replaced. Erase the entry in the DTC memory using the Vehicle diagnostic tester.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Fold the rear seat bench forward.

- Fold back the carpet in the luggage compartment.

- Remove the access/start authorization antenna 2 in vehicle interior - 2 -. Pay attention to the wires still connected.






- Disconnect the connector - arrow - and remove the access/start authorization antenna 2 in vehicle interior - 2 - from the vehicle.