Diagram 30/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module, Driver seat adjustment control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E336 - Lumbar support forward/back adjustment button

E418 - Seat forward/back adjustment button Master Seat Switch -E418- / -E421- and -E424- and -E425-

E424 - Seat height adjustment button Master Seat Switch -E418- / -E421- and -E424- and -E425-

E425 - Backrest adjustment button Master Seat Switch -E418- / -E421- and -E424- and -E425-

E470 - Driver seat adjustment control head

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

J810 - Driver seat adjustment control module Locations

S346 - Driver and front passenger seat circuit breaker Overview of fuse holder

T6bl - 6-pin connector

T10c - 10-pin connector

T12fv - 12-pin connector Locations

T12sv - 12-pin connector

T20 - 20-pin connector Locations

T32bv - 32-pin connector Locations

T52c - 52-pin connector

(95) - Ground connection 1 (in seat adjustment wiring harness)

(639) - Ground connection on left A-pillar Locations

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(M95) - Connection 3 (in seat adjustment wiring harness)

Next Diagram 30/3 (Tracks 15-28)