Backrest

Backrest

• Removing and installing the left seat is described. Removing and installing the right seat is identical.

Removing

- Attach the fixture for seat repair (VAS 6136) to the engine/transmission holder (VAS 6095).

- Remove the front seat.

- Secure the seat on the fixture for seat repair (VAS 6136).

- Remove the trim pieces from the seat:

• Remove the right trim piece on a front passenger seat without height adjustment. Refer to => [ Right Front Passenger Seat without Height Adjustment Trim Piece ] Right Front Passenger Seat without Height Adjustment Trim Piece.

• Remove the left trim on the seat with manual height adjustment. Refer to => [ Left Seat Trim with Manual Height Adjustment ] Left Seat Trim with Manual Height Adjustment.

• Remove the left trim on the seat with power height adjustment. Refer to => [ Left Seat Trim with Power Height Adjustment ] Left Seat Trim with Power Height Adjustment.

- Remove the right trim on the seat.

All Vehicles

- Disconnect the side air bag and seat heating wiring harnesses from the seat frame and free them up.

- Remove the screws - 2 - and - 4 - (35 Nm).

• The screws are microencapsulated and must be replaced after each loosening.

• Before installing the new screws, the threads of the corresponding nuts must be cleaned.

- Remove the backrest - 3 - from the seat frame - 1 -.






Installation

- Install in reverse order of removal.