Left Seat Trim with Manual Height Adjustment

Left Seat Trim with Manual Height Adjustment

• Removing and installing the left seat is described. Removing and installing the right seat is identical.

Removing

- Pull the height adjustment handle - 3 - upward and push the tab on the metal clamp - 1 - toward the inside with a small screwdriver. Pull the handle - 3 - on the lever - 2 - downward.

• For the sake of illustration, securing clip is depicted as removed in the illustration.

- Remove the clip - 1 - from the lever - 2 -.






- Remove the screw - 4 - from the trim - 1 - (2 Nm).

- Remove the expanding clip - 3 - from the trim - 1 -.

- Loosen the trim - 1 - on the seat frame - 2 -.

- Remove the trim - 1 - from the seat frame - 2 - in direction of travel.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.