Diagram 16/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Access/start authorization control module, Data bus on board diagnostic interface, Access/start system antenna in rear bumper, Access/start system antenna in luggage compartment, Access/start system antenna 1 in vehicle interior, Access/start system antenna 2 in vehicle interior





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D2 - Anti-theft immobilizer reader coil

J119 - Multifunction indicator

J285 - Instrument cluster control module Locations

J518 - Access/start authorization control module Locations

J533 - Data bus on board diagnostic interface Locations

K - Instrument cluster Locations

R136 - Access/start system antenna in rear bumper

R137 - Access/start system antenna in luggage compartment, under the rear shelf

R138 - Access/start system antenna 1 in vehicle interior, under the center console

R139 - Access/start system antenna 2 in vehicle interior

T2bm - Double connector

T20 - 20-pin connector Locations

T32 - 32-pin connector Locations

T32e - 32-pin connector Locations

(A204) - Instrument cluster CAN bus high connection (in instrument panel wiring harness)

(A205) - Instrument cluster CAN bus low connection (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

Previous Diagram 16/4 (Tracks 29-42)