Diagram 9/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering torque sensor, Power steering control module, Data bus on board diagnostic interface, Fuse 3 (on fuse panel C), Fuse 3 (on fuse panel A), Electromechanical power steering motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G269 - Steering torque sensor Locations [1][2]Diagrams

J500 - Power steering control module Locations Locations [1][2]Diagrams

J533 - Data bus on board diagnostic interface, under the instrument panel, left Locations

SC3 - Fuse 3 (on fuse panel C) Overview of fuse holder

SA3 - Fuse 3 (on fuse panel A) Overview of fuse holder

T2a - Double connector Locations

T3 - 3-pin connector Locations

T5al - 5-pin connector

T5g - 5-pin connector Locations

T6z - 6-pin connector, near the left headlamp

T20 - 20-pin connector Locations

V187 - Electromechanical power steering motor Locations [1][2]Diagrams

(12) - Ground connection in engine compartment, left Locations

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)