High Pressure Sensor G65

High Pressure Sensor G65

- Disconnect the connector from the high pressure sensor - 1 -.






• If when loosening the high pressure sensor for longer than 1 second coolant is leaking, the high pressure sensor should be secured again and the coolant drained. The check valve in the refrigerant lines is defective and must be replaced.

- Remove the high pressure sensor - 1 - from the refrigerant line connection.

• Replace the O-ring - 2 -.

• High pressure sensor - 1 - may also be installed on a different side in the vicinity of the condenser, depending on the engine version.