Diagram 4/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Throttle valve control module, Engine control module, EVAP canister purge regulator valve 1, Camshaft adjustment valve 1, Exhaust camshaft adjustment valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G186 - EPC throttle drive

G187 - EPC throttle drive angle sensor 1

G188 - EPC throttle drive angle sensor 2

J338 - Throttle valve control module Locations [1][2]Diagrams

J623 - Engine control module Locations

N80 - EVAP canister purge regulator valve 1 Locations [1][2]Canister Purge Control Valve

N205 - Camshaft adjustment valve 1 Locations Camshaft Adjustment Valve 1 -N205-

N318 - Exhaust camshaft adjustment valve 1 Locations Exhaust Camshaft Adjustment Valve 1 -N318-

T2dt - Double connector

T2du - Double connector

T2fn - Double connector

T6x - 6-pin connector

T14 - 14-pin connector

T60 - 60-pin connector Locations

T94 - 94-pin connector Locations

(D181) - Connection 87a (in engine compartment wiring harness) 2

Previous Diagram 4/12 (Tracks 141-154)

Next Diagram 4/14 (Tracks 169-182)