Ignition Coil: Service and Repair

Ignition Coil with Power Output Stage

Special tools, testers and auxiliary items required

• Puller for Ignition Coil (T10095 A)

• Assembly Tool (T10118)

Removing






- Unclip the cover strip off the ignition wiring harness - arrows - and move it forward from the tabs - A -.

- Install the assembly tool (T10118) to the release button - arrow - and carefully pull the connector up.






- Slide he puller for ignition coil (T10095 A) onto the straight side of the connector in the - direction of the arrow - and pull out the ignition coil with power output stage.






Installing






- To install, insert the ignition coil with power output stage into the corresponding spark plug shaft so that the straight connector sides fit align with each other - arrows -.

- Slide on the puller for ignition coil (T10095 A) from the straight side of the connector in the - direction of the arrow - and push the ignition coil with power output stage onto the spark plug.