Operation CHARM: Car repair manuals for everyone.

Driver-Side Side Airbag Crash Sensor







Driver-Side Side Airbag Crash Sensor

The driver thorax airbag crash sensor (G179) is installed on the front door subframe.

Removing

The general safety precautions for working on airbag, belt tensioner and battery cut-out units (pyrotechnic components) must be observed. Refer to => [ Pyrotechnic Components Safety Precautions ] Service Precautions.

Perform the following:

- Disconnect the battery.

- Remove the front door trim panel. Refer to => [ Front Door Trim Panel Assembly Overview ] Front Door Trim Panel Assembly Overview.

- Disconnect the wiring harness - 3 - from the driver side airbag crash sensor (G179) - 2 -.

- Push the catch - arrow - upward with a screwdriver. Remove the bracket - 1 - and crash sensor - 2 - from the subframe.






Installation

- Install in reverse order of removal.

- Turn on the ignition.

Make sure no one is in the vehicle.

- Connect the battery.