Instrument Panel Lamps and Switches

Rear Lid Remote Lock Key Switch (E232)

• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( trim removal wedge (3409) , screwdriver) will be positioned using commercially available adhesive tape.

The rear lid remote lock key switch (E232) - 2 - is inside the glove compartment.






Removing

- Remove the glove compartment.

- Disconnect the connector - 1 -.






- Open the tabs (top and bottom) - arrow - and remove the rear lid remote lock key switch - 2 -.

Installing

Install in reverse order of removal.