Interior Monitoring Deactivation Switch (E267)

Interior Monitoring Deactivation Switch (E267)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The interior monitoring deactivation switch is installed inside the B-pillar trim on the driver side.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

• The anti-theft alarm system must be deactivated to remove the interior monitoring deactivation switch. Refer to => [ Anti-Theft Alarm System, Activating and Deactivating ] Activating and Deactivating.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Pry out interior monitoring deactivation switch - 1 - carefully using (VAS 3409) or a screwdriver.






- Disconnect the connector - arrow - and remove the switch.






Installing

Install in reverse order of removal.