Rear Wheel Housing Liner

Rear Wheel Housing Liner

• Removing and installing is described only for the right rear wheel housing liner. Removing and installing left rear wheel housing liner is derived accordingly from this.

Removing






- Unbolt wheel.

- Remove the bolts - 5 -.

- Pull the wheel housing liner - 1 - in the rear area.

- Pull the wheel housing liner - 1 - upward out of the sill cover - 4 -.

Installation

• The speed nuts - 3 - are gas-tight.






- Inspect the speed nuts - 3 - for damage.

- Mount the wheel housing liner - 1 - from the top into the sill cover- 4 -.

- Press the wheel housing liner - 1 - into the wheel housing.

- Tighten bolts - 5 -, tightening specification: 2 Nm.