Cover and Cushion, Pass-Through Unit with Center Armrest

Cover and Cushion, Pass-Through Unit with Center Armrest

Removing

- Remove the upholstered lid - 7 - from the armrest.

- Remove the two caps - 8 - with a small screwdriver.

- Remove the two bolts - 9 - (2.5 Nm).

- Pull the storage compartment - 6 - upward and out of the mounts in the armrest.

• When installing, the release loop- 5 - must be routed through the compartment - 6 -.

- On the back side, remove all the cover profiles - arrows - from the mounts in the armrest frame - 2 -.

- Remove the cover - 4 - and the cushion - 3 - from the armrest frame.

- Fold the cover from the cushion.






Installing

- Install in reverse order of removal.