Rear Seat Cushion

Rear Seat Cushion

• The removing and installing of the left seat cushion for the rear bench seat is described. Removing and installing the right seat cushion is identical.

Removing

- Slide the left rear bench seat all the way forward.

- Fold backrest forward.

- Remove the bolt - 6 - (6 Nm) and release the spring - 7 - from the slider - 5 -.

The backrest must be folded forward when releasing the spring component - 7 -. In this position, the tension on the spring element is released.

- Fold the backrest to the rear once again.

- Remove the two nuts - 2 -.

- Using a screwdriver, push the bracket - 1 - slightly upward and remove the seat cushion from the studs on the right seat rail - 3 -.

• The bracket - 1 - is not installed on the right rear bench seat.

- Remove the two nuts - 10 -.

- Using a screwdriver, push the bracket - 9 - slightly upward and remove the seat cushion from the studs on the left seat rail - 8 -.

• The bracket - 9 - is not installed on the right rear bench seat.

- Pull the seat cushion - 4 - forward out of the guide rails in the seat frame.






Installing

- Install in reverse order of removal.