Diagram 155/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated oxygen sensor, Oxygen sensor after three way catalytic converter, Engine control module, Oxygen sensor heater, Heater for oxygen sensor 1 after catalytic converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F378 - Reduced oil pressure switch

G39 - Heated oxygen sensor Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor and Heater After Three way Catalytic Converter -G130- / -Z29-

J623 - Engine control module Control Modules in Engine Compartment

T1f - Single connector

T4va - 4-pin connector

T6af - 6-pin connector

T14a - 14-pin connector Component Locations

T94 - 94-pin connector

Z19 - Oxygen sensor heater Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations Oxygen Sensor and Heater After Three way Catalytic Converter -G130- / -Z29-

(E30) - Connection (87a) (in engine wiring harness)

* - Only with Emissions Standard BIN5/ULEV

*2 - Only with emissions standard Tier 2

*3 - Depending on equipment

Previous Diagram 155/13 (Tracks 155-168)

Next Diagram 155/15 (Tracks 183-196)