Diagram 141/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic engine control module power supply relay, Fuse panel B, Terminal 30a wire junction





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J179 - Automatic glow time control module Control Modules in Engine Compartment

J271 - Motronic engine control module power supply relay Overview Of Relay Carrier

J623 - Engine control module Control Modules in Engine Compartment

N421 - Compressor magnetic clutch

SB - Fuse panel B Overview Of Fuses

SB10 - Fuse 10 (on fuse panel B) Overview Of Fuses

SB13 - Fuse 13 (on fuse panel B) Overview Of Fuses

SB14 - Fuse 14 (on fuse panel B) Overview Of Fuses

T2cf - Double connector

T3cl - 3-pin connector

T4v - 4-pin connector

T6af - 6-pin connector

T11b - 11-pin connector

T14a - 14-pin connector Component Locations

TV3 - Terminal 30a wire junction

TV22 - Terminal 30 wire junction 2

T40 - 40-pin connector

T94 - 94-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

Z19 - Oxygen sensor heater Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations Oxygen Sensor and Heater After Three way Catalytic Converter -G130- / -Z29-

(D78) - Positive connection 1 (30a) (in engine compartment wiring harness)

(D182) - Connection 87a (in engine compartment wiring harness) 3

(E30) - Connection 87a (in engine wiring harness)

* - Refer to applicable engine wiring diagram

*2 - Only for vehicles with Start/Stop system

Previous Diagram 141/6 (Tracks 57-70)

Next Diagram 141/8 (Tracks 85-98)