Procedures

Engine, Securing to the Engine/Transmission Holder

Special tools, testers and auxiliary items required

• Engine Sling (2024 A)

• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)

• Engine and Transmission Holder (VAS 6095)

Requirements

• The engine/transmission assembly removed and secured to the engine support (T10359).

Procedure

- Separate the transmission from the engine. Refer to => [ Engine/Transmission, Separating and Assembling ] Engine/Transmission, Separating and Assembling.

- Install the engine sling (2024 A) as illustrated and lift the engine using the shop crane - load cap = 700-1200 KG (VAS 6100) from the engine-/gearbox jack (V.A.G 1383 A).






Use the pins on the hooks to prevent damaging the engine.

- Secure the engine to the engine and transmission holder (VAS 6095).