Camshaft Timing Chain (with new tools)

Timing Component Alignment Marks

Camshaft Timing Chain (with new tools)


Removing

- Rotate the vibration damper using the counter hold tool (T10355) into the Top Dead Center (TDC) position - arrow -.






• The notch on the vibration damper must line up with the arrow mark on the lower timing chain cover.

• The marks - 1 - on the camshafts must point upward.


Installing


• The painted links of the timing chain must be positioned on the marks on the sprockets.







- Check that the position of the colored chain links are aligned with the marks on the sprockets.