Vanity Mirror Lamp (W14)/(W20)

Vanity Mirror Lamp (W14)/(W20)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The lamps for the front passenger vanity mirror lamp (W14) and driver illuminated vanity mirror (W20) are installed inside the roof trim panel behind the sun visors.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

• Removal and installation for both lights is performed in the same way and is only described for one light.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the lamp from the roof trim panel using (VAS 3409) or a screwdriver.






- Disconnect the connector - arrow -.






- Remove the lamp.

Installing

Install in reverse order of removal.