Rear

Rear

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the headlamps:

• Headlamps with Halogen bulbs, refer to => [ Headlamps ] Headlamps.

• HID headlamps and cornering lamp, refer to => [ HID Headlamps With Cornering Lamp ] HID Headlamps With Cornering Lamp.

- Remove the rest of the old tabs - 1 - from the headlamp.






• The repair tab has two alternative holes for the upper screw - A -.

• Use the hole offset on the side when repairing headlamps with masked continuous high beam. Use the hole in the center when repairing all other headlamps.

- Push the tab - B - all the way onto the headlamp and tighten the 3 screws - A - to 0.5 Nm.






- Install the headlamp. Refer to => [ Headlamps ] Headlamps.

- Check the headlamp adjustment and adjust if necessary.