Halogen Headlamp Bulbs

Front Turn Signal Bulb

• The following illustrations show replacing the front turn signal bulb on a removed headlamp.

• It is not necessary to remove the headlamp in order to replace a front turn signal bulb.

• Illustrations depict replacement of front turn signal lamp at left headlamp. Replacing a right front turn signal bulb is identical.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the bulb socket with the handle for the parking lamp. Refer to => [ Parking Lamp Bulb ] Parking Lamp Bulb.

- Turn the bulb socket by the handle - 1 - all the way in - direction of arrow -.






- Remove the bulb socket by the handle - 1 -, together with the front turn signal bulb , from the headlamp. Pay attention to the wires still connected.

- Press the front turn signal bulb - 2 - into the socket and turn it in - direction of arrow - at the same time and remove it from the socket - 1 -.






Front turn signal lamp : 12V, PY21W

Installing

Make sure the cap fits correctly when installing it. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the lamp is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check the headlamp functions.