Turn Signal Bulb: Service and Repair

Front Turn Signal Bulb

• The following illustrations show replacing the left front turn signal bulb (M5).

• Removing and installing the right front turn signal bulb (M7) is identical.

• For reasons of clarity, the headlamp is shown in the uninstalled state.

• It is not necessary to remove the headlamp in order to change the front turn signal bulb.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the cap - 2 -.






- Turn the bulb socket - 1 - with the front turn signal bulb all the way in - direction of arrow - and remove it from the reflector. Pay attention to the wires still connected.






- Press the releases - arrows - and remove the front turn signal bulb - 1 - from the bulb socket - 2 -.






• The front turn signal bulb and the bulb socket are a single piece and cannot be disassembled.

Front turn signal bulb : 12V, PSY 24W

Installing

Make sure the cap fits correctly when installing it. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the lamp is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Install the cap.

- Check headlamp for functions.