Instrument Panel Relay Carrier

Instrument Panel Relay Carrier

The instrument panel relay panel is clipped into a bracket above the vehicle electrical system control module.

When disconnecting and connecting the battery, always perform the work procedure as described in the repair information. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

Removing

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove the trim on the driver side.

- Remove the Vehicle electrical system control module (J519). Refer to => [ Vehicle Electrical System Control Module (J519) ] Vehicle Electrical System Control Module (J519).

- Release the catches - arrows A - and remove the relay panel - 1 - downward. Pay attention to the wires still connected.






- Remove the relay panel - 1 - from the side guides - arrow B -.

- Disconnect all the connectors on the back of the relay panel - 1 -.

- Remove the relay panel - 1 - from the vehicle.

Installing

Install in reverse order of removal.