Mount for the Tire Pressure Monitoring Control Module (J502)

Mount for the Tire Pressure Monitoring Control Module (J502)

Perform the following:

Removing

- Remove the tire pressure monitoring control module (J502). Refer to => [ Tire Pressure Monitoring Control Module (J502) ] Tire Pressure Monitoring Control Module (J502).

- Press the 4 tabs - arrows - inward and at the same time and remove the mount - 1 - from the plate.






Installing

Install in reverse order of removal. Note the following:

- All of the mount tabs - 1 - must be correctly tightened in order.