Tire Pressure Monitoring Control Module (J502)

Tire Pressure Monitoring Control Module (J502)

Component location:

The tire pressure monitoring control module (J502) is installed on the rear right longitudinal member behind the wheel housing liner.

Perform the following:

Removing

- Turn off the ignition.

- Loosen the right rear wheel housing liner in the back and fold it forward.

- Disconnect the harness connector - 1 -.






- Lightly press the tab - arrow - to the side and remove the tire pressure monitoring control module (J502) - 2 - from the mount.

Installing

Install in reverse order of removal.