Driver Front Airbag Crash Sensor G283

Driver Front Airbag Crash Sensor G283

Removing

• The Driver Front Airbag Crash Sensor (G283) in installed in the engine compartment above the left longitudinal member.

Observe safety precautions for working on airbags. Refer to => [ Airbag System Safety Precautions ] Airbag System Safety Precautions.

- Disconnect the battery.

- Press the connector lock and remove the connector - 1 - from the Driver Front Airbag Crash Sensor (G283) - 3 -.

- Remove bolt - 2 - (6 Nm).






Installing

- Install in reverse order of removal.

- Switch on ignition.

Make sure no one is in the vehicle.

- Connect the battery.