Voltage Stabilizer J532 (J532), Removing and Installing, RHD

Voltage Stabilizer J532 (J532), Removing and Installing, RHD

Removing:

- Remove the glove compartment.

Only vehicles with HID headlamps:

- Open the retainer - arrow - and remove the AFS (adaptive front lighting system) control module - 1 - from the bracket.






Continuation for all vehicles:

- Disconnect the connector - 4 -.

- Press both tabs - 2 - and pull the voltage stabilizer (J532) - 3 - toward the rear and out of the bracket.

Installing:

Install in reverse order of removal.