Left Rear Level Control System Sensor (G76), Adaptive Chassis DCC, AWD

Left Rear Level Control System Sensor (G76), Adaptive Chassis DCC, AWD

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

Removing

- Disconnect the connector.






- Remove the bolts.

- Remove Left Rear Level Control System Sensor (G76).

Installing

Install in reverse order of removal. Note the following:

The level control system sensor lever must point toward vehicle exterior.

- Perform a basic setting on the adaptive chassis DCC => [ Adaptive Chassis DCC, Basic Setting ] Testing and Inspection

- Perform a basic setting on the headlamps => Vehicle Diagnosis, Testing, and Information System VAS 5051 in "Guided Fault Finding" function

Tightening Specifications