Diagram 81/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure/temperature sensor, All wheel drive control module, Data bus on board diagnostic interface, Haldex clutch control valve, Fuse 10 (on fuse panel C), Haldex clutch pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G437 - Oil pressure/temperature sensor All-Wheel Drive (4MOTION)

J492 - All wheel drive control module Control Modules in Luggage Comp.

J533 - Data bus on board diagnostic interface Overview of Control Modules

N373 - Haldex clutch control valve All-Wheel Drive (4MOTION)

SC10 - Fuse 10 (on fuse panel C) Overview Of Fuses

T2hz - Double connector

T6ab - 6-pin connector Component Locations

T8za - 8-pin connector

T20 - 20-pin connector

V181 - Haldex clutch pump All-Wheel Drive (4MOTION)

(61) - Ground connection on left C-pillar Overview Of Ground Connections in Luggage Comp.

(369) - Ground connection 4 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Through May 2010

*2 - From May 2010