Undamaged Window, Preparing for Glazing
Undamaged Window, Preparing for Glazing
• When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and ceramic coating.
• The remaining material serves as a base for the new adhesive sealant being applied.
Do not prime the adhesive surface or use a cleaning solution on it. Keep the adhesive surface free of dirt and grease.
Exception: if adhesion is not performed immediately after the adhesive sealing material is cut, the remaining material must be activated using activator D 181 801 A1.