Rear Window Installation Information

Rear Window Installation Information






• Check whether height stops - 2 - are present.

• For the rear window gap and height dimensions, refer to => [ Rear Window Assembly Overview ] Rear Window Assembly Overview

• Activator must not be applied onto distributing wire for window heater.

• Markings - 4 - are made along circumference of rear window for applying the sealant - 3 -.

• The adhesive bead is applied within this marking.

• Secure the rear window with tape during the curing time.

• Secure the connectors - 5 and 6 - when installing the glass with adhesive tape.

• If too much adhesive was applied and it spreads onto the window defroster, remove the excess.