Door Window

Door Window

Removing

• The following describes removing and installing the right door window. Removing and installing the left door window is identical.

• Bolts - 3 - have a left-hand thread.






- Remove front door trim.

- Pry out cover caps - 2 -.

- Lower door window until clamping screws - 3 - of door window are accessible.

- Loosen bolts - 3 - (do not remove. left-hand thread) and press clamping brackets apart.

• If the work step is not possible due to a malfunction via the electrical window regulator - 5 -, window regulator motor - 6 - can be unscrewed to be able to slide window down.

- Raise rear door window - 1 - and swing the door toward the front in the - direction of arrow -.






Installation

- Install the door window - 1 - in the - direction of the arrow - into the door. Make sure the door window sits correctly inside the window guide- 2 -.






- Without using pressure, guide the door window into clamping brackets - arrow a -.






- Align the door window glass - 1 - to the window frame - 2 - - arrow b -.






- Tighten clamping screws - 3 - (quantity: 2 left-hand thread), tightening specification: 8 Nm.

• Bolts - 3 - have a left-hand thread.

- Continue by performing the steps used in removal in reverse order.

• A function test must be performed before door trim is installed.