Rear Seat Heating Control Module (J786)

Rear Seat Heating Control Module (J786)

The rear seat heating control module is located under the instrument panel to the left of the glove compartment.

Removing

- Switch off the ignition and all electrical equipment and remove the ignition key.

- Remove the glove compartment.

- Disconnect the connector - arrows - and pry off the bracket - 1 - for the control module - 2 - and buzzer- 3 -.






• It is not possible to remove the bracket for the control module without damaging it. Always replace the bracket after removing it.

- Remove the control module from the retainer.

Installing

- Installation is performed in the reverse order of removal.