Memory Positioning Switch: Service and Repair

Memory Seat Button Module

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

Removal

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

- Turn off the ignition and all electric consumers and remove the key.

- Carefully pry the trim - 2 - off the driver door trim panel with a (VAS 3409) - 1 -.






- Disconnect the connector - 1 - and remove the button module with the trim.






- Open the retainers - arrows - and remove the button module from the trim.






Installation

Install in reverse order of removal.