Entry Lamp

Entry Lamp

• Removal and installation are described only for the left ambient lamp. The removal and installation of the right ambient lamp are derived accordingly from this.






Perform the following:

Removing

- Remove the mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.

- Remove the frame. Refer to => [ Frame ] Frame.

- Remove the mirror housing. Refer to => [ Mirror Housing ] Mirror Housing

- Release the latching mechanism - arrow a - and tilt the trim - 1 - down - arrow b -.

- Remove the ambient lamp - 2 - - arrow c -.

- Disconnect the connector - 3 -.

Installation

- Connect the harness connector - 3 -.

- Screw in the ambient lamp - 2 - - arrow c -.

- Install and latch the trim - 1 - - arrow a -.