Backrest Cushion Fan

Backrest Cushion Fan

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the backrest cover. Refer to => [ Front Seat Backrest Cover Assembly Overview ] Front Seat Backrest Cover Assembly Overview.

- Pull the bonded mat - 1 - off of the backrest cushion, remove the fan - 2 - and disconnect the fan harness connector.






Installation

- Position the fan with the outlet opening in the outlet port (markings parallel).

- Press the fan into the fan opening.

- The wiring harness points to the right out of the opening.

- Glue on the fleece starting from the fan.

Further installation is performed in the reverse order of removal.