Control Module Bracket

Control Module Bracket

Removing

- Remove the seat adjustment control module. Refer to => [ Seat Adjustment Control Module ] Seat Adjustment Control Module.

- Press the pin - 2 - in the direction of the cushion out of the clip - arrow A - of the bracket - 1 -.






- Remove the pin that was pressed out from the seat pan.

- Remove the support foot from the bracket - 2 - of the seat frame.






- For this purpose, unclip the clip - arrow A - from the seat frame - 1 -.

- Unclip the retaining tabs - arrow B - (quantity: 2).

- Carefully remove the bracket in the - direction of the arrow - from the seat pan.

- Remove the bracket from the seat pan.

Installation

To install, perform the steps used in removal in reverse order.