Backrest Release Handle

Backrest Release Handle

• Removal and installation are identical for the right and left.

Removing

- Remove the bench seats. Refer to => [ Bench Seats ] Bench Seats.

- Remove the outer rear seat trims. Refer to => [ Outer Trims of the Rear Seats ] Outer Trims of the Rear Seats.

- Carefully pull the backrest release handle - 2 - slightly off of the rear seat.






- Lift the retaining tab - 3 - on the inside of the handle with a small screwdriver and remove the handle from the release lever - 1 - - arrow -.

Installation

To install, perform the steps used in removal in reverse order.