Diagram 13/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver central locking lock unit, Lock pawl contact switch, Vacuum sensor, ABS control module, Driver door control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F220 - Driver central locking lock unit Driver Central Locking Lock Unit -F220-

F443 - Lock pawl contact switch

G608 - Vacuum sensor, near the engine control module

J104 - ABS control module Control Modules in Engine Compartment Antilock Brake System Overview ABS Control Module -J104-

J386 - Driver door control module Control Modules in Interior Driver/Front Pass Door Control Module -J386- / -J387-

T3i - 3-pin connector

T4ae - 4-pin connector

T20 - 20-pin connector

T25 - 25-pin connector Overview, Coupling Stations Inside The Vehicle

T28 - 28-pin connector Overview, Coupling Stations Inside The Vehicle

T47 - 47-pin connector

(205) - Ground connection (in driver door wiring harness)

(378) - Ground connection 13 (in main wiring harness)

(639) - Ground connection on left A-pillar Overview Of Ground Connections in Interior

(R77) - Door contact switch connection 1 (in driver door wiring harness)

* - Only for vehicles with adaptive cruise control (ACC)

*2 - Through November 2010

*3 - Depending on equipment

*4 - from November 2010

Previous Diagram 13/4 (Tracks 29-42)

Next Diagram 13/6 (Tracks 57-70)