Diagram 34/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance regulation control module, Data bus on board diagnostic interface, Distance regulation control module 2, Instrument cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Control Modules in Interior

J428 - Distance regulation control module Control Modules in Engine Compartment Locations Distance Regulation Control Module -J428-

J533 - Data bus on board diagnostic interface Control Modules in Interior

J850 - Distance regulation control module 2 Control Modules in Engine Compartment Locations Distance Regulation Control Module 2 -J850-

K - Instrument cluster

K31 - Cruise control indicator lamp

SB49 - Fuse 49 (on fuse panel B) Locations

T8h - 8-pin connector

T8i - 8-pin connector

T14b - 14-pin connector Overview, Coupling Stations Inside The Engine Compartment

T32 - 32-pin connector

T32a - 32-pin connector

(252) - Ground connection (in optional equipment wiring harness)

(640) - Ground connection 2 in engine compartment, left Overview Of Ground Connections in Engine Compartment

(B750) - CAN bus High display and control connection 1

(B751) - CAN bus Low display and control connection 1

(B752) - CAN bus High display and control connection 2

(B753) - CAN bus Low display and control connection 2

(X55) - Positive connection (15) (in optional equipment wiring harness)

* - Data bus wire (FlexRay bus)

Next Diagram 34/3 (Tracks 15-28)