Diagram 1/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver door control module, Front passenger door control module, Vehicle electrical system control module, Glove compartment lamp, Left front entry lamp, Right front entry lamp, Driver entry lamp in exterior rearview mirror, Front passenger entry lamp in exterior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E26 - Glove compartment lamp switch

J386 - Driver door control module Control Modules in Interior Driver/Front Pass Door Control Module -J386- / -J387-

J387 - Front passenger door control module Control Modules in Interior

J519 - Vehicle electrical system control module Control Modules in Interior

T2bl - Double connector

T2bm - Double connector

T2bo - Double connector

T2u - Double connector

T2v - Double connector

T10q - 10-pin connector Overview, Coupling Stations Inside The Vehicle

T16c - 16-pin connector

T16d - 16-pin connector

T17 - 17-pin connector

W6 - Glove compartment lamp

W31 - Left front entry lamp

W32 - Right front entry lamp

W52 - Driver entry lamp in exterior rearview mirror

W53 - Front passenger entry lamp in exterior rearview mirror

(107) - Ground connection (in exterior mirror wiring harness)

(186) - Ground connection (in power heated mirror wiring harness)

(B250) - Positive connection (in roof wiring harness)

(B465) - Connection 1 (in main wiring harness)

(B559) - Positive connection 1 (30g) (in main wiring harness)

* - Depending on equipment

Previous Diagram 1/5 (Tracks 43-56)

Next Diagram 1/7 (Tracks 71-84)