Coolant Pump

Coolant Pump

Special tools, testers and auxiliary items required

• Spanner Wrench (3212)

Removing

- Loosen the left front coolant pipes and move them to the side. Refer to => [ Coolant Pipes ] Coolant Pipes. The coolant hoses can remain connected.

- Remove the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove the coolant pump pulley bolts, use the spanner wrench (3212) to counter hold the pulley.






- Remove the pulley.

• Place a cloth underneath to catch any coolant leaking out.

- Remove the hose - A - and the bolts - arrows -. Remove the coolant pump.






Installing

• For the correct tightening specifications, refer to => [ Coolant Pump, Thermostat and Connecting Piece Overview ] Coolant Pump, Thermostat and Connecting Piece Overview.

Installation is carried out in the reverse order while noting the following:

- Clean the sealing surfaces; they must be free of oil and grease.

- Install the ribbed belt. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Install the left front coolant pipes. Refer to => [ Coolant Pipes ] Coolant Pipes.

- Fill the high temperature coolant circuit. Refer to => [ Draining and Filling, High Temperature Coolant Circuit ] Draining and Filling, High Temperature Coolant Circuit.