Coolant Pump

Coolant Pump

Special tools, testers and auxiliary items required

• Hose Clip Pliers (VAS 6362)

Removing

- Drain the low temperature coolant circuit. Refer to => [ Draining and Filling, Low Temperature Coolant Circuit ] Draining and Filling, Low Temperature Coolant Circuit.

- Disconnect the connector - 1 - and remove the coolant hoses - 2 -.






- Remove the bolts - arrows - , the holding strap and the coolant pump.

Installing

Installation is carried out in the reverse order while noting the following:

- Fill the low temperature coolant circuit. Refer to => [ Draining and Filling, Low Temperature Coolant Circuit ] Draining and Filling, Low Temperature Coolant Circuit.