Oil Pump and Balance Shaft Drive Chain Overview

Oil Pump and Balance Shaft Drive Chain Overview






1 Crankshaft

2 Drive Chain

• For the oil pump and balance shaft.

• Mark the running direction with paint for reinstallation later.

• Removing and installing, refer to => [ Oil Pump and Balance Shaft Drive Chain ] Oil Pump and Balance Shaft Drive Chain.

3 Drive Sprocket

• For the oil pump.

• Installed position: The labeled side faces the engine.

4 Bolt

• 30 Nm + an additional 90° (1/4) turn.

• Always replace.

5 Pressure Spring

6 Bolt

• 15 Nm + an additional 90° (1/4) turn.

• Always replace

7 Balance Shaft Sprocket

• Installed position: The labeled side faces the transmission.

8 Chain Tensioner

• With the guide rail.

9 Bolt

• 10 Nm + an additional 45° (1/8) turn.

• Always replace.