Antenna Module on Side Windows, Upper

Antenna Module on Side Windows, Upper

The left and right antenna modules are installed and removed in the same way.

Removal

- Switch off the ignition and all electrical consumers.

- Remove molded headliner.

- Disconnect the harness connectors - arrows - from the antenna module.






• Be especially careful when doing this because the wire and harness connector are extremely sensitive to mechanical stress.

• If the wire connection between the antenna module and side window is damaged, the side window must be replaced. It is not possible to repair the wiring connection.

- Remove the screw - arrow - from the antenna module.






- Slide the antenna module in the - direction of the arrow -.






- Remove the antenna module in the - direction of the arrow -.






If several antenna modules are removed, mark the assignment of the individual modules to their installation location.

Installing

Install in reverse order of removal.