Steering Column: Testing and Inspection

Steering Angle Sensor, Basic Setting

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester (VAS 5051B)

The steering angle sensor (G85) basic setting must be checked after the following assembly work:

• If the steering angle sensor was removed or replaced.

• After removing or replacing the steering column.

• After removing or replacing the steering gear.

• If the steering wheel was offset.

Basic Setting of the Steering Angle Sensor

Use the (VAS 5051B).

Body

Electrical System

01_OBD-capable systems

16 Steering column electronics control module J527

16 Steering column electronics control module functions

16 Steering column electronics control module basic setting

Follow the instructions on the screen to perform the basic setting.