Installation Information

Installation Information

General Installation Information for All Windows

• In the case of vehicles with a rain sensor, the following information must be observed

• In the case of vehicles with directional stabilization assistance, the following information must be observed.

Perform the following:

- Apply adhesive all the way around at a right angle to the glass.






Window must be installed within 10 minutes, otherwise bonding properties of window adhesive will be impaired.

Do not apply the adhesive too thick and do not press on the window glass too hard. Since the window glass no longer has sealing lips, it is possible to see the adhesive inside the seam.

• Insert window into window cut out using two double suction lifters (V.A.G 1344) , center and press in up to spacer.

• Re-affix any labels (for example, for the airbag).