Wiper Arm, Removal

Wiper Arm, Removal

Special tools, testers and auxiliary items required

• Puller (T10369/5)

Driver Side

- Pry off cover cap on the driver side - arrow - using a screwdriver.






- Loosen nuts - arrow - but do not remove completely.






- Gently move wiper arm up and down until it can be removed from wiper arm shaft.

- Remove nut and remove wiper arm from wiper motor shaft.

Passenger Side

• Only the wiper arm shaft depicted at right in illustration is driven.

- Bring the passenger wiper arm - 1 - by hand into the position illustrated so it is stretched out (dashes).






- Pry the caps - 2 - out.

- Remove both nuts - 1 - and - 2 - from the wiper arm shafts.






The puller positioned on the wiper arm can spring away while pulling the end of the wiper arm.

Protect the surrounding components from damage.

• When positioning the puller, make sure it lies directly on the metal part of the wiper arm and not under the plastic cap under the wiper arm.

- Mount the (T10369/5) - 2 - onto the end of the wiper arm - 4 - as shown in the illustration.






- Install the thrust piece - 3 - all the way and remove the wiper arm by turning the pressure bolt - 1 - clockwise.

- Repeat this procedure on the second wiper arm shaft and remove the passenger wiper arm.