Actuator

Actuator

Removing






Perform the following:

- Remove the fuel filler door. Refer to => [ Fuel Filler Door Unit ] Fuel Filler Door Unit.

- Disconnect the harness connector - 2 - in the luggage compartment under the tail lamp.

- Pull the actuator - 1 - with the line and rubber grommet out of the side panel - arrows a -.

Installation






Perform the following:

- Insert the actuator - 1 - with the line into the side panel - arrow b -.

- Make sure the grommet and the harness connector - 2 - are seated correctly.

- Install the fuel filler door. Refer to => [ Fuel Filler Door Unit ] Fuel Filler Door Unit.